Encoder sensor (Industrial parts)
> Products information > Encoder sensor (Industrial parts)
RIM 60 Series
Out Diameter Ø60mm Handle type INCREMENTAL
- Long life
- High reliability
- Customized logo can be available
- NC Machine
- NC Millimg machine
- Industrial use
Features
NC machine tools, industrial
Realization of high reliability
Custom logo can be attached
Model
External Dimension
Output Circuit
Open Collector
Voltage Output
Line Driver
Specification
Electrical Spec
Output type | Open Collector | Voltage Output | Line Driver | |
---|---|---|---|---|
Power Supply | DC+5[V]~+15[V] Ripplep-p:less than 5% | DC+5[V]~+15[V] Ripplep-p:less than 5% | DC+5[V] Ripplep-p:less than 5% | |
Consuming Current (In case of no load) |
70mA Max | 70mA Max | 150mA Max | |
Maximum Response Frequency | 5KHz MAX | 5KHz MAX | 5KHz MAX | |
Output voltage | Less than VL 0.5[V]/More than VH 10[V] | Less than VL 0.5[V]/More than VH 2.5[V] | ||
Output current | Less than 20mA | Less than 20mA | Less than 20mA | |
Rising, decline time | Less than 3μs | Less than 3μs | Less than 0.1μs | |
Common conditions | In case that the cable length of output side is 1[M] and load resistance is less than 1[kΩ] |
Mechanical Spec
Starting Torque | 300gf – cm Max |
---|---|
Maximum number of revolution | 600 rpm |
Bearing life time | 50,000[hr](In case of rotating by 3000rpm) |
Connection Table | 4P / 6P |
weight | 170g |
Output Phase Shift
CW → Clockwise viewed from shaft end
a + b, c + d = T/2 ± T/8
a , b , c , d = T/4 ± T/8
Open Collector, Voltage Output, Totem Pole
Line Driver
Rigid Spec
Operating Temp. Range | -10°C~ +70°C (No freezing) |
---|---|
Preserving temp | -20ºC ~ +85ºC |
Using humidity | 35% ~ +80% RH |
Preserving Humidity | 30% ~ +85% RH |
Internal Vibratio | 5G |
Internal Shock | 50G |
Degree of Protection | IP 50 |
Connection Table
Cable Configuration | |||
---|---|---|---|
Open Collector, Voltage Output | Line Driver |